|
|
|
SHF-0030
Steering Hub - 3" Formula/Grant 9 Bolt
|
|
This 3" billet steering hub is only for a Formula or Grant 9 bolt wheels. It is CNC machined from 6061-T6 aluminum and is available polished, powdercoated, or anodized finishes. Our hub will fit on a standard 3/4" tapered shaft.
|
|
|
|
|
SHF-0050
Steering Hub - 5" Formula/Grant 9 BOLT
|
|
This 5" billet steering hub is only for a Formula or a Grant 9 Bolt wheel. It is CNC machined from 6061-T6 aluminum and is available polished, powder coated, or anodized. Our hub will accept a standard 3/4" tapered shaft.
|
|
|
|
|
SHF-0070
Steering Hub - 7" Formula/Grant 9 BOLT.
|
|
This 7" billet steering hub is only for a Formula or Grant 9 bolt wheel. It is CNC machined from 6061-T6 aluminum and is available polished, powder coated, or anodized. Our hub will accept a standard 3/4" tapered shaft.
|
|
|
|
|
SHD-065
Steering Hub & Base Combo 5" Grant/Formuling
|
|
This 5" billet steering hub is drilled for a Grant or Formuling 9 bolt wheel. It is CNC machined from 6061-T6 aluminum and is available polished, powder coated, or anodized. Our hub accepts a standard 3/4" tapered shaft.
|
|
|
|
|
SHL-0080
Steering Hub Lecarra 3"
|
|
This 3" billet steering hub is only for Lecarra bolt patterns. Available in polished, powdercoated, and anodized finishes. Fits with standard 3/4" tapered shafts.
|
|
|
|
|
|
|
SBC-0010
Steering Base Cover - Morse
|
|
|
DMP Morse steering base cover is spun from 6061-T6 aluminum and is available in polished, powdercoated, and anodized finishes. Our cover replaces the stock plastic bezel on Morse rack and pinion steering systems.
|
|
|
|
|
SBC-0005
Steering Base Cover - Teleflex Rack
|
|
|
|
DMP Teleflex steering base cover is spun from 6061-T6 aluminum and is available in polished, powdercoated, and anodized finishes. Our cover replaces the stock plastic bezel on Teleflex rack and pinion steering systems.
|
|
|
|
|
HS-001
Hub Spacer - 9 Bolt Formula/Grant
|
|
|
|
Hub spacers are used when installing a steering wheel mounted trim switch. The spacers are drilled so the trim switch wiring can easily routed to the center of your hub. Rack and Pinion steering systems from Morse and Teleflex can be modified by gun drilling the shaft so the wiring can be routed through the center of the shaft to the back of the dash. When completed, the installation will be very clean with no exposed wires. Hub spacers include steering wheel mounting hardware.
|
|
|
|
|
|
|
|
