|
SKT-0010
Ski Tow
|
|
DMP billet ski tows are machined from 6061-T6 billet aluminum. The outside diameter is 3.5". It accepts two 5/16" socket cap bolts. This part is available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKT-0015
Ski Tow Bezel
|
|
DMP ski tow bezels are constructed from 1/4" thick 6061-T6 billet aluminum. 4" in diameter. It is available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKT-035
Ski Tow Pop Up
|
|
DMP pop up ski tows are constructed from 6061-T6 billet aluminum. They are available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
|
|
|
|
|
|
SKT-0040
Ski Pylon - 48"
|
|
2" diameter aluminum ski pylon. 48" tall with a rope receiver groove. This pole is available in polished and anodized finishes.
|
|
|
|
|
|
SKT-0025
Ski Pole Bezel - Upholstery Installation
|
|
Ski Pylon bezel for upholstery installations. Bezel dimensions, 2 3/4" I.D., requires a 3" mounting hole in boat and the outside diameter is 4.5". Available in polished, powdercoated, and anodized finishes. Optional cap part number SKT-0026 is sold separately.
|
|
|
|
|
|
|
SKP-075
Ski Pylon Kit - Universal SB Chevy
|
|
Billet aluminum universal ski pylon kit for 350 jet boat applications. This kit includes a 32" ski pole, a lower mount that bolts on top of the water inlet plates, an upper mount that bolts on top of the thermostat housing, and all mouting hardware. Available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKP-070
Ski Pylon Kit - Universal BB Chevy
|
|
Billet aluminum universal ski pylon kit for 454/502 jet boat applications. This kit includes a 32" ski pole, a lower mount that bolts on top of the water inlet plates, an upper mount that bolts on top of the thermostat housing, and all mouting hardware. Available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKP-496
Ski Pylon Kit - Mercury 496
|
|
Billet aluminum ski pylon kit for 496 engines. Kit includes a powdercoated steel engine bracket, billet upper support, billet interior bezel, and a billet ski pole (18"). Available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKT-0035
Wake Board Pylons
|
|
Wake Board Pylons from DMP are 2" in diameter and include all mounting hardware, a short ski pole and a tall wakeboard pole. Kits are available polished, powder coated, or anodized. All wake board pylons are special order per each boat.
|
|
|
|
|
SKP-500
Ski Pylon - 500 EFI
|
|
Billet aluminum ski pylon kit for HP500 fuel injected engines. Kit includes a powdercoated steel engine bracket, billet upper support, billet interior bezel, and a billet ski pole (18"). Available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKP-525
Ski Pylon Kit - Merc 525
|
|
Billet aluminum ski pylon kit for 525 fuel injected engines. Kit includes a powdercoated steel engine bracket, billet upper support, billet interior bezel, and a billet ski pole (18"). Available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKT-0030
Ski Pylon Kit - Marine Power 496/Jet
|
|
Ski Pylon Kit has a 2" diameter and towers 8" above the hatch. This kit is for a standard 496 jet boat motor without a closed cooling system. Our kit includes the pylon and all mounting hardware. Pylons come polished, powder coated or anodized.
|
|
|
|
|
SKT-045
Ski Pylon 350 Merc With Water Bypass
|
|
Billet aluminum ski pylon kit for 350 engines. Kit includes a powdercoated steel engine bracket, billet upper support, billet interior bezel, and a billet ski pole (18"). Available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
SKT-0031
Ski Pylon Kit - Marine Power 496/Jet/Closed Cooling
|
|
Ski Pylon Kit has a 2" diameter and towers 8" above the hatch. This kit is for a standard 496 jet boat motor with a closed cooling system. Our kit includes the pylon and all mounting hardware. Pylons come polished, powder coated or anodized.
|
|
|
|
|
|
|
BE-010
3/8" SS Bow Eye - Short
|
|
Bow eyes are commonly used for transom tie downs, ski tows, and bow eyes. Thread length is 2 1/4". Overall length is 3 3/4".
|
|
|
|
|
BE-012
3/8" SS Bow Eye - Long
|
|
Bow eyes are commonly used for transom tie downs, ski tows, and bow eyes. Thread length is 3". Overall length is 4 1/2".
|
|
|
|
|
SW-0050
Switch Bezel 3/8"
|
|
|
Our switch bezels are machined from 1/4" thick 6061-T6 aluminum and measures 3/8" ID X 1" OD. Used on push/pull style switches. These washers are available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
|
BE-380
Bow Eye Mount Plate - 3/8"
|
|
|
|
Billet aluminum mounting plate for 3/8" stainless steel bow eyes. This plate is available in polished, powercoated, and anodized finishes.
|
|
|
|
|
BE-015
1/2" SS Bow Eye
|
|
Bow eyes are commonly used for transom tie downs, ski tows, and bow eyes. Thread length is 3 1/2". Overall length is 5 1/4".
|
|
|
|
|
SW-0030
Stringer Washer 1/2"
|
|
|
|
Our billet stringer washers are machined from 1/4" thick 6061-T6 billet aluminum and measure 1/2" ID X 1 1/4" OD. Washers are available in polished, powdercoated, and anodized finishes.
|
|
|
|
|
|
BE-120
Bow Eye Mount Plate - 1/2"
|
|
|
|
Billet aluminum mounting plate for 1/2" stainless steel bow eyes. This plate is available in polished, powercoated, and anodized finishes.
|
|
|
|
|
|
|
|
|
