|
CL-ST-400 Billet Docking Cleat 4"
|
These 4" docking cleats are machined from 6061-T6 billet aluminum. Mounting holes are 1 3/4" on center and accept (2) 5/16 X 18 fasteners. Available in polished, powdercoated, and anodized finishes.
|
|
|
|
CL-ST-600 Billet Docking Cleat 6"
|
These 6" docking cleats are machined from 6061-T6 billet aluminum. Mounting holes are 2 3/4" on center and accept (2) 5/16 X 18 fasteners. Available in polished, powdercoated, and anodized finishes.
|
|
|
|
CL-ST-800 Billet Docking Cleat 8"
|
These 8" docking cleats are machined from 6061-T6 billet aluminum. Mounting holes are 3" on center and accept (2) 3/8" flat head fasteners. Available in polished, powdercoated, and anodized finishes.
|
|
|
|
DC-PU-200 Docking Cleat Button Pop-Up
|
Our button cleats are machined from 6061-T6 billet aluminum with a stainless steel shaft. They are 2" in diameter and stand off the mounting surface 1/2".
|
|
|
|
|
|
|
|
AC-301-6 6" Accon Slim-Line Pull-Up Cleat
|
Accon 6" Slim-Line pull up cleats have a sleek narrow design. Constructed out of marine grade 316 stainless steel. They are sealed so no water proofing cup is necessary.
|
|
|
|
|
AC-202-4 4 1/2" Accon Pop-Up Cleat
|
Accon 4.5" Pop-up cleats are a flush mount quick release cleat. The cleat remains in the closed position until the button is pressed. To close simply push the cleat down and it locks in the flush position. Pop-up cleats are constructed of Stainless Steel. Each cleat includes a backing plate/template.
|
|
|
|
|
AC-202-6 6" Accon Pop-up Cleat
|
Our Accon 6" Pop-up Cleat remains in the open position at the touch of a button. Simply push back and it locks in the flush position. All of our Pop-up Cleats are made out of Stainless Steel. Each Pop-up Cleat is shipped with an aluminum backing plate/template.
|
|
|
|
|
AC-202-8 8" Accon Pop-Up Cleat
|
Accon 8" Pop-up cleats are a flush mount quick release cleat. The cleat remains in the closed position until the button is pressed. To close simply push the cleat down and it locks in the flush position. Pop-up cleats are constructed of Stainless Steel. Each cleat includes a backing plate/template.
|
|
|
|
|
AC-202-6C 6" Waterproofing Cup
|
This 6" black plastic cup mounts behind the Pop-up Cleat and is designed to prevent excess water from entering into the hull.
|
|
|
|
AC-202-8C 8" Waterproofing Cup
|
This 8" black plastic cup mounts behind the Pop-up Cleat and is designed to prevent excess water from entering into the hull.
|
|
|
|
|
|
QP-100 3/8" Quick Pin Assembly
|
Dual function 3/8" quick pin assembly. Excellent for use with bumper ties and mooring ropes. Make docking easy with our high strength all stainless steel quick pin cleats.
|
|
|
|
|
QP-101 1/2" Quick Pin Assembly
|
Dual function 1/2" quick pin assembly. Excellent for use with bumper ties and mooring ropes. Make docking easy with our high strength all stainless steel quick pin cleats.
|
|
|
|
|
FC-0010 Fender Cleat
|
4" stainless steel low profile fender cleats. Small, compact, and easy to use.
|
|
|