|
BD-015
Billet Bilge Dump 3/4"
|
|
Billet aluminum water dump accepts a -8 AN or a 3/4" slip on hose. The thread diameter is 3/4". The inside diameter is 1/2". The head diameter is 1". Fits thru surfaces up to 1.5" thick. They are available polished, powder coated or anodized. Includes a spacer and nut.
|
|
|
|
|
BD-023
Billet Bilge Dump 3/4" Short
|
|
Billet aluminum water dump with a 3/4" OD and a 1/2" ID. It accepts a 3/4" slip on hose. Fits through 1/8" to 5/8" thick surfaces. The outside head diameter is 1". They are available polished, powder coated or anodized. Includes a spacer and nut.
|
|
|
|
|
BD-020
Billet Bilge Dump 5/8"
|
|
Billet aluminum water dump with a 3/4" OD and a 1/2" ID. It accepts a 5/8" slip on hose with a 1" diameter outside head. Will fit thru surfaces up to 1.5" thick. They are available polished, powder coated or anodized. Includes a spacer and nut.
|
|
|
|
|
|
|
BD-022
Billet Bilge Dump 1"
|
|
Billet aluminum water dump with a 1 1/8" OD and a 3/4" ID. It accepts a 1" slip on hose with a 1 5/8" diameter outside head. Fits thru surfaces up to 1.5" thick. They are available polished, powder coated or anodized. Includes a spacer and nut.
|
|
|
|
|
BD-024
Billet Bilge Dump 1 1/8"
|
|
Billet aluminum water dump with a 1 1/8" OD and a 3/4" ID. It accepts a 1 1/8" slip on hose with a 1 5/8" diameter outside head. Fits thru surfaces up to 2" thick. They are available polished, powder coated or anodized. Includes a spacer and nut.
|
|
|
|
|
BD-026
Bilge Dump Bezel - Large
|
|
Billet aluminum bilge dump bezel for DMP large billet water dumps. 2 1/4" O.D. Available in polished, powdercoated and anodized finishes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
